Wacom Cintiq 18SX - Manual (Page 54)

52
To Install the DuoSwitch:
1. Remove the pen tip cone by
turning it counterclockwise.
Then pull the grip forward
over the pen tip.
2. Install the original grip (the
one with the DuoSwitch ac-
cess slot) by aligning the pen
case rails with the grooves in-
side the grip and pushing the
grip over the pen tip.
When properly positioned, the
DuoSwitch access hole will re-
veal the trimmer capacitor.
Then install the pen tip cone
by turning it clockwise onto
the pen.
3. Align the DuoSwitch into
place, making sure to match
the switch position to the grip
molding. Then gently press in
on the DuoSwitch until it
snaps into place.
1
2
3