Wacom Cintiq 18SX - Manual (Page 19)

17
Rear View
Digital/Analog (DVI/VGA) Switch
Use this switch to correctly set Cintiq for
the video connection you will be using. On Screen Display
(OSD) Controls
These controls enable you to adjust a variety of display
settings. See
Adjusting the LCD Display on page 38 for
more information.
Cable Guide
Tuck the main cable into this guide
when working with Cintiq in a semi-
supported lap position. Remove the
cable from the guide when mounting
Cintiq on the display stand.
See
Working with Cintiq on page 32.
Cabling and Connectors
The connectors on the integral
cable are for DVI-I video
connection, USB or serial
data, and power connection.
Bearing Hub
Fits into the bearing
recess on the Cintiq
stand. Allows rotation
of Cintiq, and easy
mounting and removal
from the stand.
Important: Always store the Interactive Pen Display on the Cintiq
display stand or in its original packing carton when not in use. Do not
store the display unit on a flat surface that would excessively bend or
crimp the cable.
Next Step: Installation. See page 18