Intercom calling – VTech IP8300 User Manual

Page 93

www.vtechphones.com

Intercom calling

Swap internal and external calls

While you are on an external call and you wish to intercom another handset

without disconnecting the external call:
Step 1: While on a call, press the

Options softkey.

Step 2: Press the up or down NavKey or to choose

Internal call then

press the

Select softkey or center NavKey/SEL/ .

Step 3: Enter the destination handset number and the destination handset

will ring. The originating handset will beep and the external call will

be put on hold. To cancel the intercom call and return to the external

call, press the

Swap softkey.

Step 4: After the destination handset has answered the intercom call,

Active

will be displayed on the intercom connection window on the screen

of the originating handset to show the call which is activated.

Step 5: Press the

Options softkey on the originating handset. Press up

or down NavKey or to choose

Swap internal then press

the

Select softkey or center NavKey/SEL/ to swap between the

internal and external call.

Active will be shown on the screen to

indicate the activated call and

On Hold will be shown on the screen

to indicate the call on hold.

Step 6: To end the intercom call without disconnecting the external call,

press the

Options softkey on the originating handset. Press the up

or down NavKey or to choose

Release internal then press

the

Select softkey or center NavKey/SEL/ to end the intercom

call.

Step 7: To transfer the external call, press

OFF on the originating handset

while the external call is activated and the intercom call is on

hold.

Intercom calling

Answer

Int 2

00:01:55

Incoming Call