Telephone operation, Change alarm – VTech IP8300 User Manual

Page 60

www.vtechphones.com

Change alarm

Use this menu if you have set the alarm before and would like to change the

settings. To reset the alarm:
Step 1: Press the

Menu softkey from the idle screen.

Step 2: Press the , , and/or NavKeys to choose

Date and Time

then press the

Select softkey or center NavKey/SEL/ .

Step 3: Press the up or down NavKey or to choose

Alarm then press

the

Options softkey.

Step 4: Press the up or down NavKey or to choose

Change alarm

then press the

Select softkey or center NavKey/SEL/ . The Set

alarm screen will display.

Step 5: Press the left or right NavKey or to choose between

On or Off

for the daily alarm.

Step 6: Press the down NavKey to move to the next box to enter the

time.

Step 7: Press the left or right NavKey or to move the cursor back and

forth inside the box, and use the dial pad to enter the time.

Step 8: If the 12 hour format is chosen in

Set time screen. Press the down

NavKey to move to the next box to choose

AM or PM. Press the

left or right NavKey or to choose between

AM or PM.

Step 9: Press the

Apply softkey or center NavKey/SEL/ to confirm. The

alarm time will be shown on the

Date and Time screen and an alarm

icon

will be shown on the idle screen.

Step 10: The screen will display

Enter valid value! if you enter incorrect

information.

Step 11: Press the

Back softkey to return to the previous screen.

Set alarm

Apply

Back

Off

Daily alarm

Enter time

02:05

Date and Time

Select

Back

Telephone operation

Date and Time

Time

03:05PM

Date

01-01-2007

Alarm

11:45AM

Options

Back

Time
03:05
Date
01-01-2007
Alarm

Date and Time

Select

Back

Change alarm

Disable alarm

Alam tone