Telephone operation, Set the date – VTech IP8300 User Manual
Page 55
www.vtechphones.com
50
Telephone operation
Set the date
Follow these steps to set the date:
Step 1: Press the
Menu softkey from the idle screen.
Step 2: Press the , , and/or NavKeys to choose
Date and Time
then press the
Select softkey or center NavKey/SEL/ .
Step 3: Press the up or down NavKey or to choose
Date and press
the
Options softkey.
Step 4: Press the up or down NavKey or to choose
Set then press
the
Select softkey or center NavKey/SEL/ . The Set date screen
will display.
Step 5: Press the left or right NavKey or to change the date format
between:
MM/DD/YYYY, DD/MM/YYYY or YYYY/MM/DD.
Step 6: Press the down NavKey to move to next box to enter the date.
Step 7: Press the left or right NavKey or to move the cursor back and
forth inside the box, and use the dial pad to enter the date.
Step 8: Press the
Apply softkey or center NavKey/SEL/ to confirm. The
date will be shown on the
Date and Time screen and the main
idle screen. The screen will display
Enter valid value! if you have
entered an incorrect information.
Step 9: Press the
Back softkey to return to the previous screen.
Date and Time
Select
Back
Telephone operation
Set date
Apply
Back
MM DD YYYY
Format
Enter date
01-01-2007
Date and Time
Time
02:41PM
Date
01-01-2007
Alarm
Options
Back
Date and Time
Time
02:24PM
Date
01-01-2007
Select
Back
Alarm
Set
Hide