VTech IP8300 - Manual (Page 53)

www.vtechphones.com 48
Telephone operation
Date and time
The default date and time settings are 01-01-2007 and 12:00 AM, they will
be displayed on the idle screen. You can allow the date and time to be set
automatically if you subscribe to caller ID service provided by your local
telephone company (refer to Caller ID on page 19).
Set the time
To set the time on the handset:
Step 1: Press the
Menu softkey from the idle screen.
Step 2: Press the , , and/or NavKeys to choose Date and Time
then press the Select softkey or center NavKey/SEL/ .
Step 3: Press the up or down NavKey or to choose Time then press
the Options softkey.
Step 4: Press the up or down NavKey or to choose Set then press
the Select softkey or center NavKey/SEL/ . The Set time screen
will display.
Step 5: Press the left or right NavKey or to alternate the format of
time between 12 and 24 hour.
Step 6: Press the down NavKey to move to the next box to enter the
time.
Step 7: Press the left or right NavKey or to move the cursor back
and forth inside the box, and use the dial pad to enter the time.
Date and Time
Select Back
Date and Time
Time
03:05
Date
01-01-2007
Alarm
Options Back
Set time
Apply Back
12 Hour
Format
Enter time
02:05 PM
Telephone operation
Time
01:51PM
Date
01-01-2007
Date and Time
Select Back
Set Alarm
Hide