VTech IP8300 - Manual (Page 92)

www.vtechphones.com 87
The intercom feature allows the conversation between two handsets. If there
is an incoming call, a conference call can be set up as well. You must own
at least two handsets to use these features. Additional handset(s) can be
purchased separately.
Intercom
The intercom feature allows conversation between two handsets. To make
an intercom call:
Step 1: Use the dial pad to enter the number assigned to the handset you
want to call, and press or the Intercom softkey. If you want to
use the speakerphone, enter the destination handset number then
press .
Step 2: The screen of the originating handset will display the call connection
screen with the destination handset number.
Step 3: The destination handset will ring, and the screen will display the call
connection screen with the originating handset number.
Step 4: To answer the intercom call, press or the Answer softkey on
the handset. Press to answer using the speakerphone.
Step 5: During a call, press the Mute softkey to mute the microphone. The
other party will not be able to hear you until you press the UnMute
softkey to resume normal conversation.
Step 6: To end an intercom call, press OFF on the handset.
Intercom calling
End call
Calling...
Int 2
The handset
number can be
found on the idle
screen in the
upper right hand
corner below the
battery icon.
��