VIEWSONIC Wireless Media Gateway WMG80 - Manual (Page 23)

ViewSonic Wireless Media Gateway 17
LAN (Primary Setup)
IP Address: The default is Gateway IP Setting. No change is
necessary.
Subnet Mask: The default is Gateway IP Setting. No change
is necessary.
Wireless (Primary Setup)
Mode: click the down arrow field for the drop-down menu
with a list of wireless networking modes. Select one of the
following modes based on your environment setting:
• 11b+g: If you have 802.11b and 802.11g devices in your
network, then keep the default setting, 11b+g.
• 11g Only: Default for optimal performance. If you have
802.11g devices, select 11g Only. This will give you the
best wireless performance.
Channel: change as needed (recommended) especially if
you experience interference with other wireless routers in the
vicinity.
SSID: the default “viewsonic” is automatically entered. No
change is necessary.
Security: select one.
Disable > click Apply > press Logout to close the
screen.
Enable > click Configure Security. The Wireless LAN
Configuration screen appears as shown on the next
page. Security Mode defaults to WEP.
Wireless LAN Configuration
screen shown on the next page.