VIEWSONIC Wireless Media Gateway WMG80 - Manual (Page 17)

ViewSonic Wireless Media Gateway 11
(4) Connect the AC Power Adapter to the Power Jack on the back
of the Gateway. Attach the AC Power Adapter to the Power
Cord. Connect the Power Cord to an AC Wall Outlet or a power
strip with surge protection.
The blue POWER light on the front turns on. The Gateway is
ready to configure when the green STATUS light turns on.
Back of Gateway
Power Jack
AC Power Adapter to Power Cord
AC Wall
Outlet
Front of Gateway
POWER ON = Blue LED
Other LEDs are green