Olympus SZX7 User Manual
Page 30
27
Place a specimen on the stage plate, hold the cup stage by the edge,
and tilt the cup stage slowly. (Fig. 22)
}If the specimen slips on the stage plate, hold the specimen with the
provided specimen holder.
}To fix a container such as a petri dish, insert the provided tube into the
specimen holder to fix the container by pinching. (Fig. 23)
CAUTION
1. Do not touch the friction surfaces on the cup stage and seat with a hand. If the friction surfaces are contaminated
with oil,etc., wash with a neutral detergent before use.
2. If an eccentric load of more than 20 grams is applied to the edge of the cup stage, it may move spontaneously.
3. When a tall specimen is placed and the cup stage is tilted, the specimen may go out of focus. In this case, adjust
the focus again.
3
Operation
(Figs. 22 & 23)
Fig. 22
Fig. 23