Olympus SZX7 - Manual (Page 13)

SZX7
10
4-3 Microscope Body
1 Zoom Magnification Indication (Figs. 9 & 10)
The body zoom magnification is indicated on zoom adjustment knob
(right) @.
The total magnification can be calculated with the following formula.
Total
magnification
Objective
magnification
Eyepiece
magnification
Body zoom
magnification
Total magnification indication ring (Fig. 10)
}An objective other than the 1X model is provided with two total magnifi-
cation indication rings*. Use the ring having indication “SZX7” with the
SZX7 microscope.
* : The indicated figures are the total magnification when the 10X eye-
piece is used.
1. Widen the magnification indication ring ² and fit into the deep part of
the left zoom adjustment knob ³ so that the indicated figures can be
read from the front of the microscope.
2. Gently turn the magnification indication until it clicks into the predeter-
mined position.
# The magnification indication ring can also be attached on the right
zoom adjustment knob, but the microscope zoom magnification
indication is hidden in this case.
= X X
2 Switching the Click Stop ON-OFF (Fig. 9)
}The click stop function provides a click stop for each zoom magnification
value indicated on the zoom adjustment knob. When the click stop
function is switched OFF, the zoom magnification can be adjusted finely
around each zoom magnification value.
1. To switch the click stop function ON, turn the click stop screw | clock-
wise (in the direction of the arrow) all the way until it is stopped using the
Allen screwdriver.
A click stop is provided for each zoom magnification value indicated on
the zoom magnification indication @.
2. To switch the click stop function OFF, turn the click stop screw | counter-
clockwise (in the opposite direction to the arrow) by about 2 turns using
the Allen screwdriver.
# To prevent damaging the microscope cover and internal mecha-
nism, do not turn the screw excessively.
Fig. 9
Fig. 10
³
|
²
1