VIEWSONIC PJD2121 VS12617 - Manual (Page 16)

11
To use the OSD menus, please set them to your familiar language first.
1. Press MENU on the remote control to turn on the OSD.
Press Enter to select.
3. Press to select the language you need and press
Enter.
2. Use to highlight the LANGUAGE, press Enter to
select.
4. Press MENU on the remote control to leave and save
the settings.
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a
time.
Be sure the Auto Source Select function in the Advance menu is On (which is the default of this projector) if you want
the projector to automatically search for the signals.
You can also manually cycle through the available input signals. Press SOURCE on the projector or remote control.
Adjusting the projected image
Adjusting the projection angle
The projector is equipped with 1 adjuster foot. This adjuster changes the image
height and projection angle. To adjust the projector:
Screw the front adjuster foot to adjust the height.
PJD2121 ViewSonic