VIEWSONIC PJ650 - Manual (Page 31)

ViewSonic PJ650 28
Screen Menu
With the SCREEN menu, the five items shown in the Table below can be
performed.
Please perform each operation in accordance with the instructions in the
Table.
Item Description
BLANK Selection of BLANK Screen:
MyScreen
ORIGINAL , , , ,
,
The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen
has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the
“Temporarily Blanking the Screen” section of the separate booklet, Vol. 1 (Basic)).
MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen
(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
Option screens: Various colored non-patterned (plain) screens displayed within the Menus.
•
The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color
screen several minutes after being displayed.
START UP Selection of START UP Screen:
MyScreen
ORIGINAL TURN OFF
The START UP Screen may be voluntarily selected. The START UP Screen is displayed when no
signal has been inputted, or when spec signals are being inputted.
MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen
(or screens). At the time of factory shipment, this is set as a non-pat- terned (plain) blue color
screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
TURN OFF: A non-patterned (plain) blue color screen.
•
The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen several
minutes after being displayed.