Connecting your devices, Plug & play – VIEWSONIC PJ650 User Manual

Page 13

ViewSonic PJ650

Connecting your devices

Devices You Can Connect to the Projector (Refer to this section for planning your device configuration

to use for your presentation.)

CAUTION

• Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate

“PJ650 Quick START GUIDE”.

ATTENTION Precautions to observe when connecting other devices to the projector

• Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each

device to be connected.

• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device

to the projector may generate extremely loud noises or other abnormalities that may result in malfunction

and/or damage to the device and/or projector. Refer to the “TECHNICAL” of the PJ650 User Guide

for

the pin assignment of connectors and RS-232C communication data.

• Make sure that you connect devices to the correct port. Incorrect connection may result in mal-function

and/or damage to the device and/or projector.

• A component cable and some other cables have to be used with core set. Use the accessory cable or a

designated type cable for the connection. For cables that have a core only at one end, connect the core to

the projector.

• Secure the screws on the connectors and tighten.

NOTE:

When connecting the projector to a notebook computer, set it so as to activate the RGB external image output

(setting it to CRT display or to simultaneous LCD and CRT display). For more information, refer to the

instruction manual of the notebook computer.

Plug & Play

This projector is compatible with VESA DDC 1/2B. Plug & Play is possible by connecting to a computer that

is compatible with VESA DDC (Display Data Channel).
Use this function by connecting the accessory RGB cable with RGB IN 1 terminal (DDC 1/2B compatible).
Plug & Play may not operate by any other connection.

NOTE:

• Plug & Play is a system configured with peripheral equipment which includes a computer, display and an

operating system.

• This projector is recognized as a Plug & Play monitor. Load the driver contained in the CD Wizard

included with the unit.

DVD players

Display monitors

Laptop computers

Desktop computers

VCRs