VIEWSONIC PJ452 - Manual (Page 42)

ViewSonic PJ452 38
OPTION menu
With the OPTION menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress, except for the items LAMP
TIME and FILTER TIME. Then perform it referring to the
following table.
Item Description
AUTO
SEARCH
Using the buttons ▲/▼ turns on/off the automatic signal
search function.
TURN ON TURN OFF
When the TURN ON is selected, detecting no signal
automatically cycles through input ports in order of following.
Then when an input is found, the projector will stop searching
and display the image.
If no signal is found, the projector will return to the state before
the operation.
RGB S-VIDEO VIDEO
═════=═════╝
AUTO OFF Using the buttons ▲/▼ adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes) ↔ Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off
automatically.
When the time is set to 1 to 99, and when the passed time with
a no-signal or an unsuitable signal reaches at the set time, the
projector lamp will go off and the power indicator begins
blinking. Please refer to the section “Turning off the power.”
(
16)