VIEWSONIC PJ452 - Manual (Page 39)

ViewSonic PJ452 35
SCREEN menu
With the SCREEN menu, items shown in the table below
can be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to progress. Then perform it
referring to the following table.
Item Description
LANGUAGE Using the buttons ▲/▼ switches the OSD (On Screen Display)
language.
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL
==========================
║ ITALIANO NORSK NEDERLANDS PORTUGUÊS
║ ====================================
║
SVENSKA
║ =====================================
║ PУCCKИЙ SUOMI POLSKI TÜRKÇE
╚===================================
MENU
POSITION
Using the buttons ◄/►/▲/▼ adjusts the menu position.
To quit the operation, press the MENU button or keep no operation
for 10 seconds.
OSD BRIGHT Using the buttons ▲/▼ switches the brightness level of the OSD
(On Screen Display).
BRIGHT DARK
BLANK Using the buttons ▲/▼ switches the mode for the blank screen.
The blank screen is the screen for the temporarily blanking feature
(
21). It is displayed by pressing the BLANK button.
MyScreen ORIGINAL BLUE WHITE BLACK
════=══=══=══=══=====══=══=════
MyScreen is the screen you can register a desired screen.
ORIGINAL screen is the existing standard screen. BLUE, WHITE
and BLACK are non-patterned (plain) screens in each color.
• To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLACK screen after several
minutes.
• For the MyScreen, please refer to the item MyScreen. (
36)