VBrick Systems VB5000 - Manual (Page 80)

72 © 2009 VBrick Systems, Inc.
Recorder State Failed
Stopped, never started
Stopped, by user
Stopped, Disk Full
Stopped, File Size Limit
Stopped, FTP Overrun
Stopped, Duration Complete Stopped, Unformatted
Stopped, IO Error
Stopped, File Is Pumping
Running, From Power Up
Running, Scheduled
Running, User Initiated
IP Packets Received The number of IP Packets received.
Bytes Transferred The number of received bytes transferred across the internal bus.
IP Buffer Full Count The number of times the hard drive buffer has been filled to
capacity.
Non Video Packet The number of non-video packets received.
Unexpected
Fragments The number of mis-ordered packets received. Each appliance
maintains a statistical report on Unexpected Fragments received
from a particular video stream. Note: If multiple devices in the same
unit (i.e. decoder or hard disk) are tuned to the same stream, the
Unexpected Fragments count on Slot1 is used exclusively to report
statistical results.
Source IP Address The IP Address of the video source.
Receive IP Address The configured receive IP address. If unicast, this is the same as the
source IP and address.
Detected Transport
Rate The measured transport rate received by the recorder.