VBrick Systems VB5000 - Manual (Page 122)

114 © 2009 VBrick Systems, Inc.
FTP Queue Operation
Changes to the entries on the screen d not take effect until you select an action button (
Add
to FTP Queue
,
Remove from FTP Queue
or
Flush Queue
).
VBStar Status
For a description of VBStar Status screens, see Status: Hard Drive Status on page 70.
State The current state of the Hard Drive. Values can be:
• Transfer in Progress
• Idle
• Invalid FTP Server
• Invalid User Name
• Invalid User Password
• Local File Open Error
• Socket Open Failure
• Transfer Failure
• Socket Quit Failure
Size Size of the file to be sent.
Rate Transmitted data rate of the file being FTPed.
Transfer Current amount transferred.
Last Queue
Operation File added OK; or File removed OK; or blank.
Directory The target directory located on the server. See notes under sending to
VBrick and non-VBrick appliances in the previous IWS screen.
File Name of the File from the hard drive.
Batch The batch filename of an individually indexed batch file. If a whole
batch is to be FTPed, File should be set to the base name of that
batch and this object is to be set to Entire Batch.
Destination The server to which the file or files is to be transferred. Servers are
configured in the Servers section of the same page.
Add to FTP Queue Adds the selected file or the batch of files, as indicated by to the FTP
file and Batch drop-down box. FTP transfer starts immediately after
operation.
Remove from FTP
Queue Allow the file to be removed from the FTP transfer queue.
Flush Queue Removes all the current files from FTP transfer queue. It also makes
any changes made to the variables of this group operational before
performing this flush action, so that the values of variables in this
group represent the actual values used by the VBrick.