VBrick Systems VB5000 - Manual (Page 21)

MPEG-2 Configuration
VBrick MPEG-2 Appliance Admin Guide 13
Configuration: Network > Management
These parameters define information used in the SAPs emitted by the VBrick, which are
received by the VBDirectory management tool (see the VBDirectory User Guide) and other
VBrick applications such as the ETV Portal Server.
Group Name Optional. This parameter defines the Group Name. It is included in
the Management SAPs used by VBDirectory. It is used for organizing
VBricks into groups to simplify use of VBDirectory.
Unit Number Optional. The appliance unit number (range 0–2147483647) is used to
identify each VBrick in a group.
Management SAP Used by VBDirectory or MCS to detect the unit for the purpose of
remote management. The following parameters apply.
Transmit Enable This parameter controls the transmission of the Management SAPs
(Enable or Disable).
Retransmit Time This parameter defines the Management SAP Retransmit Time.
Time to Live The number of hops (between routers) for which a Management SAP
is valid on the network.
Type of Service The TOS (Type of Service) can be configured in the IP header to
establish packet priority in the network.
IP Address This parameter defines the Destination IP Address for Management
SAPs.
Port This parameter defines the Destination Port for Management SAPs.