Uniden CLX 465 - Manual (Page 68)

[ 6 7 ] T r o u b l e s h o o t i n g w w w . u n i d e n . c o m
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first. If these steps
do not solve your problem, please call our Customer Service Hotline at 1-800-297-1023. (Mon - Fri 7 am
to 7 pm, Sat/Sun 9 am to 5 pm, CST. The Customer Service Hotline is closed on holidays.)
Symptom Suggestion
The charge LED won't
illuminate when the handset is
placed in the cradle.
• Make sure the AC adapter is plugged into the base or the chargers (if you have more than one
handset) and the wall outlet.
• Make sure the handset is properly seated in the cradle.
• Make sure the charging contacts on the handset are clean.
The charge LED flashes. • Clean the charging contacts on the handset.
The audio sounds weak.
• Move the handset and/or base away from metal objects or appliances and try again.
• Make sure that you are not too far away from the base.
Unable to make or receive calls.
• Make sure that you are not too far away from the base.
• Make sure the line is not in use. If an outside call is already in use on a line, you cannot use that line
to make another outside call.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter and the backup battery.
• Change the Digital Security Code (see page 15).
The handset does not ring or
receive a page.
• Make sure that you are not too far away from the base.
• Charge the battery pack in the handset for 15 hours by placing the handset on the base or charging
cradle.
• Change the Digital Security Code (see page 15).