Changing the digital security code, Installing the beltclip – Uniden CLX 465 User Manual

Page 16

Text mode
Original mode

Chang

the

Di
gital

[ 1 5 ] C h a n g i n g t h e D i g i t a l S e c u r i t y C o d e

w w w . u n i d e n . c o m

Changing the Digital Security Code

The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code. To change the digital security code:

1. "System Reset" options ("De-register the Handset" and "Replacing the Base

Setting") for all the handsets you have (see page 69).

2. Re-register each handset by following the steps on page 14.

Installing the Beltclip

To attach the beltclip
Insert the beltclip into the holes on each side of the handset.
Press down until it clicks.
To remove the beltclip
Pull either side of the beltclip to release the tabs from the
holes.