Uniden CLX 465 - Manual (Page 62)

Multi-Handset F
e
ature
s
[ 6 1 ] M u l t i - H a n d s e t F e a t u r e s w w w . u n i d e n . c o m
Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 12.
Using DirectLink Mode
In DirectLink Mode, a pair of handsets
can function as two-way radios.
DirectLink Mode does not interfere with
the base's ability to make or receive
telephone calls. You must set both
handsets to DirectLink Mode to make a
directlink call.
To enter DirectLink mode, select the
Direct Link option from the main menu,
and then press the ENTER soft key.
D ire ct Li nk Mod e com ple te appears once
the selection is confirmed.
To make a DirectLink call, press the DirectLink soft key. Select
the handset you want to call. To answer a DirectLink call, press
talk/flash or if Any Key Answer is on, press any number key,
* /
tone or # key. Press end when you want to hang up.
To exit DirectLink mode and be able to receive normal phone
calls again, press the CANCEL soft key, and then press the OK
soft key.
5'.'%6
&KTGEV.KPM
•If the party is out of
range, No Signal
appears in the display,
and the operation will
be canceled.
•While a pair of
handsets are in
Intercom DirectLink
Monitor mode, they
cannot be used to
make or receive calls.
Other handsets can
still make and receive
calls.
note