Universal Remote Control (URS) WR7 - Manual (Page 9)

Page 9
Programming WR7 using
Pre-Programmed Codes
There are three ways you can program your
WR7 using the component brand codes that
are pre-programmed into the remote.
• Quick Set-Up Method
• Three-Digit Code Entry Method
• Auto--Search Method
The Quick Set-Up Method is a unique new fea-
ture that enables the fastest and easiest set-up
by using one-digit codes for up to 10 major
brands for each component. The Three-digit
Code Entry Method allows you to set-up the
WR7 using 3-digit codes for component brand
names. It is also a fast and easy way to pro-
gram the remote. The Auto-Search Method
scans through all the brands in the remote con-
trol, one at a time. It should be used when
either the Quick Set-Up or Three-Digit Code
Entry Methods do not work.
* * *
Quick Set-Up Method
STEP 1: Manually or using your old
remote, turn on the component you want to
program—for example, to program your TV,
turn on your TV set.
STEP 2: Point the WR7 toward the compo-
nent that you want to program (in this case
the TV set) and press and hold the compo-
nent button (in this case the TV button).
While holding down the compo-
nent button
, begin to press numeric
keys, one number at a time, starting from 1,
continuing to 2, 3…0 until the component
(in this case the TV) turns off.