Universal Remote Control (URS) WR7 - Manual (Page 19)

Page 19
AUX Function: Programming
a 7th Component
After you’ve finished programming the WR7 for six
primary components and you did not use AUX, you
can take advantage of the AUX function to program
a 7th component, such as a second TV, DVD, or
any other audio/video component that you may
have in your system. Simply program the [AUX] but-
ton in the same manner as any other component
using either the Quick Set-Up Method, the 3-Digit
Code Entry Method, the Auto-Search Method or the
Learning Method.
Finding a Component’s
Set-up Code Number
If you used the Auto--Search or Learning Methods
to program a component, you may not know the
code number you programmed. Here is a way for
you to identify what that code number is, so you
can make a note in the back of this Manual for
future reference.
STEP 1: Press the component button you
would like to verify and the SELECT [SEL]
button at the same time for two seconds until
the selected component LED light turns on.
IMPORTANT: You have 30 seconds to
perform the next step while you are in pro-
gramming mode. If you do not press a but-
ton within 30 seconds, the component LED
light will turn off.
The remote will exit the programming mode
and you will have to start over.
COMPONENT
BUTTONS
SELECT
INFO