Universal Remote Control (URS) WR7 - Manual (Page 25)

Page 25
SimpleSound ™ Total System
Volume Control
SimpleSound is one of the most exciting fea-
tures of the WR7. It gives you total volume
control over ALL the components in your sys-
tem, even those that do not have built--in vol-
ume control, such as TIVO, DVD and VCR.
SimpleSound saves you the hassle and incon-
venience of constantly switching between
component modes just to control volume.
First you should identify which device in your
system will be used to deliver sound. In a
basic system, the sound may come from your
TV speaker. In a more advanced system, the
sound may come from your audio compo-
nents (such as a Surround Sound Receiver or
Home Theatre system).
Now, let’s set--up SimpleSound. Here’s how:
STEP 1: Press and hold the button that corre-
sponds to the Component you want to add vol-
ume control to (such as a DVD or VCR) and the
SELECT (SEL) button at the same time for about
three seconds until the component LED light
turns on.
IMPORTANT: You have 30 seconds to per-
form the next step while you are in program-
ming mode. If you do not press a button within
30 seconds, the component LED light will turn
off. The remote will exit the programming mode
and you will have to start over.
COMPONENT
BUTTONS
SELECT