Nikon SB-900 - Manual (Page 30)

C–8
C
Operation
Control buttons
1
3
4
5
6
7
8
9
2
Names and functions of control buttons
1 [MODE] button:
Press to select fl ash mode. (kC-10)
2 [ZOOM] button:
Press to adjust zoom position.
(kD-57)
3 Function button 1:
4 Function button 2:
5 Function button 3:
Press to select which item to change.
Functions differ according to
selected mode and status of the
SB-900. (kC-17)
6 Test fi ring button:
Controls test firing (kD-60) and
modeling illuminator. (kD-61)
The button setting for test
firing/modeling illumination can
be changed with the custom
function. (kC-22)
•
•
•
•
7 Power ON-OFF/wireless
setting switch:
Rotate to turn power on and off.
Controls the master and/or remote
flashes when using wireless
multiple flash shooting. (kD-39)
To control master and/or remote
flashes, rotate the switch while
holding down the button in the
center of the switch.
8 Selector dial:
Rotate to change selected item. The
selected item is highlighted on the
LCD. (kC-9)
9 [OK] button:
Lightly pressing the [OK] button
confirms selected setting.
Hold the [OK] button down for
one second to display custom
function. (kC-21)
•
•
•
•
•