F –13, Ti ps on speedlight care and reference information, Specifi cations – Nikon SB-900 User Manual
Page 129

F–13
F
Ti
ps on Speedlight care and reference information
External
power source
Batteries
Min. recycling
time (approx.)
*1
Min. number
of fl ashes
*1
/
recycling time
*1
Nikon DC
Unit SD-7
C-type Alkaline-manganese x 6
*2
2.0 sec.
320/2.0 – 30 sec.
C-type Ni-MH (Nickel Metal Hydride) x 6
*3
1.5 sec.
280/1.5 – 30 sec.
C-type Ni-MH (Nickel Metal Hydride) x 6
*4
1.5 sec.
260/1.5 – 30 sec.
Nikon High-
Performance
Battery Pack
SD-8A
*5
AA-type Alkaline-manganese x 6
2.0 sec.
300/2.0 – 30 sec.
AA-type Lithium x 6
2.2 sec.
550/2.2 – 120 sec.
AA-type Oxyride
TM
x 6
1.8 sec.
320/1.8 – 30 sec.
AA-type Ni-MH (2600 mAh) x 6
1.5 sec.
260/1.5 – 30 sec.
AA-type Ni-MH (eneloop) x 6
1.5 sec.
250/1.5 – 30 sec.
Nikon High-
Performance
Battery Pack
SD-9
*5
AA-type Alkaline-manganese x 4
1.8 sec.
280/1.8 – 30 sec.
AA-type Lithium x 4
2.4 sec.
500/2.4 – 120 sec.
AA-type Oxyride
TM
x 4
1.4 sec.
280/1.4 – 30 sec.
AA-type Ni-MH (eneloop) x 4
1.1 sec.
350/1.1 – 30 sec
AA-type Alkaline-manganese x 8
1.1 sec.
450/1.1 – 30 sec.
AA-type Lithium x 8
1.4 sec.
840/1.4 – 120 sec.
AA-type Oxyride
TM
x 8
1.0 sec.
440/1.0 – 30 sec.
AA-type Ni-MH (eneloop) x 8
1.0 sec.
520/1.0 – 30 sec.
Power Bracket
Unit SK-6
*5
AA-type Alkaline-manganese x 4
2.2 sec.
190/2.2 – 30 sec.
AA-type Lithium x 4
3.2 sec.
420/3.2 – 120 sec.
AA-type Oxyride
TM
x 4
2.0 sec.
240/2.0 – 30 sec.
AA-type Ni-MH (2600 mAh) x 4
1.9 sec.
240/1.9 – 30 sec.
AA-type Ni-MH (eneloop) x 4
1.9 sec.
230/1.9 – 30 sec.
*1: When firing the Speedlight at full output once every 30 seconds (120 seconds with lithium batteries).
*2: Use AA-type alkaline-manganese batteries with SB-900.
*3: Use AA-type Ni-MH (2600 mAh) batteries with SB-900.
*4: Use AA-type Ni-MH (eneloop) batteries with SB-900.
*5: Use the same type batteries with both SB-900 and external power source.
With fresh batteries. Performance may vary depending on battery freshness or battery specifications.
With modeling illumination using the SD-8A or SK-6, the SD-8A or SK-6 may not work
for flash output operation. In this case, the power is provided only by the batteries in the
SB-900. This is not a malfunction.
•
•
Specifi cations