Nikon SB-900 - Manual (Page 29)

C–7
C
Operation
Press the [MODE] button.
Rotate the selector dial to
indicate on the LCD.
Press the [OK] button.
Make sure that the ready-
light on the SB-900 or in the
camera’s viewfinder is on
before shooting.
When no ready-light indicator appears,
lightly press the shutter release button
to activate the ready-light. •
Selecting the flash mode STEP
5
Changing the flash mode
Rotate the selector dial to display available
flash mode icons on the LCD.
Flash mode icons (kC-10)
Only flash modes that are available are displayed onon the LCD.
The flash mode can also be selected by pressing the [MODE] button. •
•