TP-Link TL-R4299G - Manual (Page 85)

TL-R4299G Dual-WAN SMB Broadband Router User Guide
79
Figure B-4
) Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
Method two: Use DMZ Host
Login to the router, click the menu Forwarding→DMZ. On the DMZ screen, select “Enable”, and
enter your IP address into the “DMZ Host IP Address” field (using 192.168.1.102 as an example),
then to click the Save button.
Figure B-5
7. I want to build a WEB Server on the LAN, what should I do?
Because the WEB Server port 80 will interfere with the WEB management port 80 on the router,
you must change the WEB management port number to avoid interference. And then add a WEB
Server on your LAN. You can follow the steps below to proceed.
Step 1: To change the WEB management port number: Login to the router, click the menu
Security→Remote Management. On the Remote Management screen, enter a port
number except 80 (such as 88) into the "Web Management Port" field. Click Save and
the router will reboot.