TP-Link TL-R4299G - Manual (Page 81)

TL-R4299G Dual-WAN SMB Broadband Router User Guide
75
UDP datagram.
¾
Detect Result - The interval between sending datagram and recving datagram, uint is ms.
4.13.11 IP NAT Table
Choose menu “System Tools→IP NAT Table”, you will see the IP NAT in the table below:
Figure 4-79
¾ Out Link - The WAN port which links the router.
¾
Protocol Type - The protocol which is used in the link.
¾
IP address - The local or remote IP address to be examined.
¾
Show - To examine the information which the local or remote IP address equals that you
input.
¾
Refresh - To get the latest status and settings of the router
¾ Per page - To set how many information entries a page show.
4.13.12 NAT Source Port Settings
Choose menu “System Tools→NAT Source Port Settings”, you can configure the rang of
exterior port for NAT.
Figure 4-80
Click the Restore button to restore the setting to default value- 1040-65500.