Toshiba IK - HD1C - Manual (Page 33)

33
Power supply 12V DC 㫧10%
Power consumption Approx. 10.3 W (including a camera head)
Pick-up system RGB, 3CCD, Micro prism system
Image sensor 1/3 inch, IT 䋭CCD
Output pixels Horizontal : 1920, Vertical : 1080
Scanning system 2 䋺1 interlace
Scan frequency [59.94 Hz setting] Horizontal : 33.716 kHz, Vertical : 59.94 Hz
[60 Hz setting] Horizontal : 33.75 kHz, Vertical : 60 Hz
[59.94 Hz setting] Horizontal : 33.716 kHz 㫧35 ppm, Vertical : 59.94 Hz 㫧35 ppm
[60 Hz setting] Horizontal : 33.75 kHz 㫧35 ppm, Vertical : 60 Hz 㫧35 ppm
[59.94 Hz setting] Horizontal : 33.716 kHz 㫧35 ppm, Vertical : 59.94 Hz 㫧35 ppm
[60 Hz setting] Horizontal : 33.75 kHz 㫧35 ppm, Vertical : 60 Hz 㫧35 ppm
Sync system Internal/External (Automatic switching)
Horizontal resolution 800TV lines standard
Vertical resolution 800TV lines standard
Sensitivity F6.8 standard 䋨2000 lx, 3000 K䋩
Minimum illumination 13 lx 䋨F2.2, sensitivity 䋫18 dB䋩
SN ratio 56 dB standard (gain 0 dB, DNR OFF)
Ambient temperature (32 㫦 㫦F) to 40 0 F to 104 㷄 㷄
Ambient humidity Less than 90%
Weight Approx. 730 g (1.61 lbs)
External dimension
(4.33”(W) 㬍1.57”(H)㬍7.32”(D)) (excluding protrusions)
110(W) 㬍40(H)㬍186(D) mm
Scene file(user memories) 5 files (A, B, C, D, E)
White balance ATW 䋨Automatic tracing balance䋩, AWB䋨Automatic white balance䋩
MANUAL 䋨Manual䋩
Gain AUTO 䋨Automatic gain control䋩, MANUAL䋨Manual䋩, OFF䋨0 dB䋩
Output signal or RGB : 0.7 V (p-p) standard 75 Y/P
B
/P
R
㱅 unbalanced, BNC connector
HD-SDI (SMPTE 292M) : 0.8 V (p-p) standard 75 㱅 unbalanced, BNC connector
Sync signal output SYNC : 75 㱅 unbalanced BNC connector 0.6 V 0.1 V
Interface Serial data interface 䋨RS-232C䋩
Optional parts IK-HD1H 䋨1/3 inch 3CCD camera head䋩
EXC 䋭HD03 (Approx. 3 m (118”) Camera cable)
EXC 䋭HD06 (Approx. 6 m (236”) Camera cable)
EXC 䋭HD10 (Approx. 10 m (394”) Camera cable)
EXC 䋭HD30 (Approx. 30 m (1181”) Camera cable)
Design and specifications are subject to change without notice.
* These conditions are only satisfied when the camera control unit is connected to camera head model # IK-HD1H.
External sync input HD SYNC 0.6 V (p-p) 75 㱅 unbalanced BNC connector
9. SPECIFICATIONS
㫧