Toshiba IK - HD1C - Manual (Page 19)

19
(d) Changing the automatic shutter zone area
The available picture area is shown by the shading correction on the screen that is parted in 64.
㽲 Move the “㸢” to AREA by pushing [MENU UP], [MENU DOWN] buttons.
㽳 Select the measurement light area by pushing [DATA UP], [DATA DOWN] buttons.
䌛DATA UP䌝
PRESET A PRESET B PRESET C PRESET D PRESET E
䌛DATA DOWN䌝
PRESET A PRESET B PRESET D PRESET C
PRESET E
Note:
These available picture areas are not displayed on the screen.