Toshiba IK - HD1C - Manual (Page 23)

23
䋨 䋨䋨 䋨3䋮 䋮 䋮 䋮2䋩 䋩䋩 䋩 Changing the setting in ATW(Automatic Tracking White balance) mode
White balance mode AWB, ATW, MANUAL
-- 3 WHT BAL --
R PAINT adjustment -10 to 10
MODE ATW
R PAINT 0 B PAINT adjustment -10 to 10
B PAINT 0
(a) Changing R PAINT
㽲 Move the “㸢” to R PAINT by pushing [MENU UP], [MENU DOWN] buttons.
㽳 Select the desired value of red paint by pushing [DATA UP], [DATA DOWN] buttons.
䌛DATA UP䌝 Red is increased.
䋭10 0 10
Red is decreased. 䌛DATA DOWN䌝
The available picture area is shown by the shading correction on the screen that is parted in 64.
PRESET A PRESET B PRESET D PRESET C
PRESET E
Move up and down
by pushing
MENU UP,DOWN Select the desired
value by pushing
DATA UP,DOWN
(b) Changing B PAINT
㽲 Move the “㸢” to B PAINT by pushing [MENU UP], [MENU DOWN] buttons.
㽳 Select the desired value of blue paint by pushing [DATA UP], [DATA DOWN] buttons.
䌛DATA UP䌝 Blue is increased.
䋭10 0 10
Blue is decreased. 䌛DATA DOWN䌝
Note:
These available picture areas are not displayed on the screen.