Strain relief and boot installation – Trango Broadband M5580M-FSU User Manual
Page 26
Deployment & Installation
Trango Broadband Wireless — M5580M-FSU (Atlas Fox) User Manual Revision 2
page 22
Strain relief and boot installation
Prior to deployment, insert a properly terminated Cat-5 Cable through Boot and the Foam strain relief. Connect the
Cable into the M5580M-FSU’s port opening. Last, clip the front end of the boot into the unit and then clip the back end
of the boot into to the unit, as shown in the photographs below.
Figure 15
Figure 16
Mounting Hardware
Radios are supplied with mounting hardware for pole and antenna dish installations. See figure 17 - 21 below for proper
use of the mounting hardware.
Figure 17
Figure 17: M5580M – FSU Series SU Pole Mount (1” – 2” Diameter)