Self-diagnostic test print, Fig. 8-2, For gh25 model – Toshiba B-415 User Manual

Page 23

ENGLISH VERSION EO1-33014

Tear off the printed media upward or downward with the cutter.

NOTE:

Do not pull the media out of the printer, as this will misalign the print position of the next
label.

Media

9. SELF-DIAGNOSTIC TEST PRINT

Fig. 8-2

9. SELF-DIAGNOSTIC TEST PRINT

Turn the power on while pressing the [FEED] button. Three LED lamps light up. After about 5
seconds, they extinguish, then the first label of the test print is issued.

For GH24 and GH34 models

9. SELF-DIAGNOSTIC TEST PRINT

For GH25 model

E9-1

PROGRAM VERSION FMRM0072201 V2.0 2800 (FONT:0200)(BOOT:A900)
PRINTER ID

00123

FORM VERSION

0000000000 0000000000 0000000000 0000000000

SRAM CHECK

512KB

SENSOR CHECK

R:2.9V T:0.5V P:1.9V H:+25

C A:+25

BATTERY LEVEL

8.3V (OVER 220 LABELS)

TONE ADJUST

+00

PARAMETER

[B-415] [PC-850] [0]

FEED ADJUST

+0.0mm MODEL NAME

B-415-GH Series

HEAD CHECK

PEEL THRESHOLD

2.0V

PRINT MODE

TPCL-LE

SERIAL NO.

3S000001

IrDA IrCOMM

PROGRAM VERSION FMRM0072002 V2.0 2800 (FONT:0200)(BOOT:A900)
PRINTER ID