Toshiba B-415 - Manual (Page 10)

E2-2
2. SPECIFICATIONS ENGLISH VERSION EO1-33014
NOTE: This printer requires an exclusive printer cable. When purchasing it, please contact your
authorized TOSHIBA TEC representative.
Item Description
Baud rate 9600 bps
Protocol XON/XOFF, 8 bit data, Even parity, Stop bit = 1 bit
Signals TXD, RXD, RTS, CTS
2.3 Serial Interface (RS-232C) (for GH24 and GH34 models)
Item Description
Type FM superhet UHF radio telemetry receiver (Complies with MPT1340*,
ETS300-220**)
Receiving frequency 418 MHz*, 433 MHz**
Communication method Unidirectional (Receive only)
Transmission speed 4800 bps
Protocol 8 bit data, non parity, stop bit = 1 bit
Communicating distance 3 m
*: GB model
**: QP model
NOTE: The RS-232C interface cable must be disconnected when using the radio communication.
2.5 Bluetooth Interface (for GH25 model)
2.4 Radio Interface (for GH34 model)
The following specification is applicable only to the GB and QP models.
Item Description
Communication method Bluetooth V1.1 (with logo certification)
Supported profile Serial port profile
Communication class Class 2
Communication distance 3m/360 degrees
Service name ZV-AT
Device nickname TOSHIBA TEC BT
Flow control Credit based flow control
Operation mode Slave mode
PIN code Not used.
Receive buffer 2 K bytes
Link break time out 20 sec.
Inquiry control No response to any inquiry can be made in 1 minute after the power is
turned ON.
SR mode at page/inquiry scanning R1 scan interval 1.28 sec.
Scan window 22.5 msec.
2.3 Serial Interface (RS-232C) (for GH24 and GH34 models)