Toshiba B-415 - Manual (Page 13)

E3-1
3. APPEARANCE ENGLISH VERSION EO1-33014
3. APPEARANCE
3.1 Front/Rear View
Front View Rear View
3.1 Front/Rear View
TOSHIBA
TEC CORPORA
TION
Shoulder Strap Holder
AC Adapter
Terminal
(Inlet)
Power Switch
Media Cover
Media Cover
Release Catch
Status Indicator
0 0 0
PRINT BATTERY ERROR
Battery Cover
IrDA
Interface
window
Feed Button
Fig. 3-1 Fig. 3-2
3.2 Description of LED Lamp
■ ■ ■ ■ ■ PRINT LED (Green)
Lights up for 2 or 3 seconds together with BATTERY and ERROR LEDs when the power is turned
on.
Lights up during the data transmission and the printing.
Extinguishes when no printing is performed.
■ ■ ■ ■ ■ BATTERY LED (Red)
Extinguishes when the battery power is sufficient to perform printing.
Lights up when the battery power becomes insufficient to perform printing due to low-voltage.
(When this LED lights up, printing cannot be performed.)
Flashes for three seconds when the power is turned on to indicate that the battery has reached the
end of its life. (Recommended that you should replace the battery with a new one.)
■ ■ ■ ■ ■ ERROR LED (Red)
Blinks when an error has occurred.
3.3 Description of Switch/Button
■ ■ ■ ■ ■ POWER SWITCH
A slide power switch.
Full appearance of the orange mark indicates power ON.
Fully hidden orange mark indicates power OFF.
■ ■ ■ ■ ■ FEED BUTTON
Each time this button is pressed, the printer re-issues the previous label. When the button is held,
the printer issues labels continuously.
Serial Interface
Connector
(RS-232C)