Tascam CD-VT1MKII - Manual (Page 22)

22
— TASCAM CD-VT1MKII
Use the Setup menu to make changes
to the setup of the CD-VT1MKII.
To open the Setup menu, press and
hold down the CD EFF/SETUP key.
Press either the PREV or NEXT key to
select between menu items, and press
either the UP or DOWN key to select
values.
Mix balance
This function allows you to adjust the
mix balance between the microphone(s)
sound and the CD sound.
Select
MIX in the Setup menu, and select
a value between M (Mic) 10 – M1, 0,
C (CD) 1 – C10.
CD playback mode
This function allows you to set the CD
playback mode.
Select
PLAY in the Setup menu, and set
it to either ALL (plays all tracks) or SGL
(plays a single track).
UP key and DOWN key function
The function of the UP and DOWN
keys when you are in the home display
mode can be set so that they change the
value of the menu item that you select.
This can be a useful shortcut.
Select
UPDN in the Setup menu, and
select one of the four functions by
pressing either the UP or DOWN key.
Choose from the following list:
MIX : mix balance (See Changing
your preferences)
TMP : CD playback tempo (See
Pitch and tempo changes)
KEY: key control (See Pitch and
tempo changes)
FIN: fine tuning (See Pitch and
tempo changes)
CUE key function
This function allows you to set the
function of the CUE key.
Select CUE in the Setup menu, and set it
to either CUE or FLS (FLASH).
CUE: playback is paused at the last
point where playback started.
FLS: playback starts automatically
from the last point where
playback started.
Changing your preferences for the CD-VT1MKII