Tascam CD-VT1MKII - Manual (Page 14)

14
— TASCAM CD-VT1MKII
Entering the menu system
To enter the menu category of your
choice, do the following:
 Effect menu
Tap the
EFFECT key
 Voice Change menu
Tap the
V.CHANGE key
 Setup menu (system setup)
Press and hold down the
CD EFF/
SETUP key
 Tempo/Key menu
Tap the
TMP/KEY key
 CD Effect menu
Tap the
CD EFF/SETUP key
 Metronome menu
Press and hold down the
STOP
key.
The menu then shows the menu cate-
gory you select, reversed and blinking.
Menu
Category Menu
Item Values (default values
are underlined) Notes
EFFECT EFF 01-18 sets the number of the
effect preset
PAR – sets the effect parameter
VOICE
CHANGE
VCHG DN, OFF, UP sets the voice change
function
SETUP MIX M10 – M1, 0, C1 – C10 sets the mix balance
between CD and input
PLAY ALL/SGL selects all or single play
CUE CUE/FLS selects the action of the
CUE key
UPDN MIX, TMP, KEY, FIN Sets the UP/DOWN
key function in the home
display mode
CAL 435 – 440 – 445 sets base frequency (A4,
unit: Hz)
OSC (OFF), _C–_B, C-A, B,
_
C–
_
B,
(3 octaves)
sets the pitch of the
oscillator
Using the menu system