Important safety precautions – Tascam CD-VT1MKII User Manual

Page 2

— TASCAM CD-VT1MKII

Important Safety Precautions

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON-
NEL.

The lightning ﬂash with arrowhead symbol,
within an equilateral trinagle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s en-
closure that may be of sufﬁcient magnitude to
constitute a risk of electric shock to persons.

WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.

FOR U.S.A.
TO THE USER

This equipment has been tested and found to

comply with the limits for a Class B digital de-

vice, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable pro-

tection against harmful interference when the

equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can

radiate radio frequency energy and, if not in-

stalled and used in accordance with the instruc-

tion manual, may cause harmful interference to

radio communications.. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encour-

aged to try to correct the interference by one or

more of the following countermeasures.

a) Reorient or relocate the receiving antenna

b) Increase the separation between the

equipment and receiver.

c) Connect the equipment into an outlet on a

circuit other from that to which the receiver

is connected.

d) Consult the dealer or an experienced radio/

TV technician for help.

CAUTION

Changes or modiﬁcations to this equipment not

expressly approved by TEAC CORPORATION for

compliance could void the user’s authority to

operate this equipment.