Making connections – Tascam CD-VT1MKII User Manual
Page 12
12
— TASCAM CD-VT1MKII
Making connections
Connecting a microphone (MIC IN
1 / MIC IN 2)
MICROPHONES
Connect a microphone to either
the
MIC IN 1
jack or the
MIC IN 2
jack. You can also connect micro-
phones to both jacks and use them
together.
The
MIC IN
jacks (1 and 2) of the
CD-VT1MKII accept unbalanced
input signals. Use a ¼ inch mono
phone plug.
Adjusting the microphone level
Use the
INPUT
control to adjust the
level of the input signal from the
MIC
IN 1
and
MIC IN 2
jacks.
The
INPUT
control adjusts the in-
put level of
MIC IN 1
jack and
MIC
IN 2
jack together (the levels of the
two jacks cannot be adjusted sepa-
rately).
Adjusting the mix balance
between microphone(s) and CD
Press and hold down the
CD EFF/
SETUP
key to open the Setup menu,
and press either the
NEXT
or
PREV
key
to choose
MIX
. You can set the mix bal-
ance using values between M (Mic) 10
– M1, 0, C (CD) 1 – C10.
Inputting signals from external
devices (
LINE IN
)
LINE OUT OF EXTERNAL DEVICE
The
LINE IN
jack accepts a stereo
mini-jack plug (3.5mm).
The input level at the
LINE IN
jack
cannot be adjusted, so adjust the
output level on the external device
you have connected.