Tektronix PHASER 240 - Manual (Page 178)

B Modifying Printer Operations
B-4 Phaser 240 Drivers and Utilities
Printing a configuration page
Note If you are using a Macintosh with QuickDraw GX and System
Software 7.5, you can use the Tektronix Phaser 240 GX
driver to print a copy of the configuration page. Refer to
page A-11 for instructions.
A configuration page is similar to the printer’s startup page, but it also
provides details about each available port. Use the files for your
computer type.
Macintosh users
1. Follow the instructions on page 2-13 to decompress the Phaser 240
Utilities.sea archive file on the Macintosh Driver and Printer
Utilities diskette to your computer’s hard disk.
2. Select the appropriate printer in the Chooser.
3. Locate the LaserWriter Utility in the folder on your hard disk
containing decompressed utility files.
4. Double–click the LaserWriter Utility icon to start the application.
5. Choose Download PostScript File from the Utilities menu.
6. Select the Configuration Page file from the list, then click Open.
7. At the prompt Save PostScript output as: you are asked
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name. Click Save to
send the file to the printer.
Macintosh file name PC file name
LaserWriter Utility and
Configuration Page PRNTCNFG.PS