Tektronix PHASER 240 - Manual (Page 117)

Using Color 6
Printing Reference 6-25
PC and workstation users
1. Copy the PANT240.PS sampler file from SAMPLERS directory on
the Windows 3.1 Driver and Printer Utilities diskette onto your
computer’s hard disk. You may want to place this file in a Utilities
directory. Or, you can print this file directly from the diskette.
2. Load thermal-transfer coated paper and a thermal-wax transfer
roll in the printer. Refer to the Phaser 240 Color Printer User Manual
for instructions on loading media.
3. Print the PANTONE Color chart using one of the following
methods:
■ PC users : Use the DOS COPY command, described on page 3-19,
to send the color chart file to the printer.
Or, use the Copy command in Windows File Manager, described
on page 3-20, to send the color chart file to the printer.
■ Workstation users : Send the color chart file to the printer as you
would any PostScript file.
4. Select PANTONE Colors within an application using the colors on
the chart.