Tektronix PHASER 240 - Manual (Page 136)

8 Troubleshooting
8-10 Phaser 240 Drivers and Utilities
7. At the prompt Save PostScript output as: you are asked
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name. Click Save to
send the file to the printer.
8. If no output is returned by the printer, the LaserWriter Utility
displays a dialog box. Click OK in the box to continue.
PC and workstation users
1. Locate the TEKEHAND.PS file in the PHSR240 directory on the
Windows 3.1 Driver and Printer Utilities diskette.
2. Copy the file to your hard disk, or use it from the diskette.
3. Use one of the following methods to send the file to the printer:
■ PC users : Use the DOS COPY command, described on page 3-19,
to send the TEKEHAND.PS file to the printer.
Or, use the Copy command in Windows File Manager, described
on page 3-20, to send the TEKEHAND.PS file to the printer.
■ Workstation users: Send the TEKEHAND.PS file to the printer as
you would any PostScript file.