Fcc compliance, Declaration of conformity, Other regulatory statements – Tyco 0-1591700-x User Manual
Page 5: General operational requirements, 5ghz channel assignments in europe, 4ghz channel assignments in europe, Other 5ghz channel assignments, Other 2.4ghz channel assignments
Wireless Access Point Model 0-1591700-x User Manual
Page 5 of 33
FCC Compliance
This device complies with Part 15 of the FCC rules. Operation is subject to the 2 conditions:-
1. This device may not cause harmful interference,
2. This device must accept any interference received including interference that may cause
undesired operation.
Declaration of Conformity
Tyco Electronics declare that this product 0-1591700-x is in compliance with the essential
requirements and other relevant provisions of R&TTE Directive 1999/5/EC. For evaluation of
compliance with the Directive, the following standards were applied:-
o
ETSI EN 300 328-2 (07-2000)
o
ETSI EN 301 893 (01-2001)
o
ETSI EN 301 489-1 (07-2000)
o
ETSI EN 301 489-17 (09-2000)
Other Regulatory Statements
General Operational Requirements
1. Ensure that the correct channels and band implemented for the country of usage. The current
channel settings for various countries are listed below and are subject to change.
Operation of IEEE802.11a 5GHz Radio in the European Community
1. The access point is restricted to indoor usage using the channels in the 5.150GHz to 5.350GHz
spectrum (Channels 36 to 64) to reduce the potential for interference.
2. The radio spectrum regulatory bodies in Greece and Spain currently do not permit operation of
the access point in the 5GHz band using IEEE802.11a, however operation in the 2.4GHz band
using IEEE802.11b/g is permitted. To comply with this requirement, the 5GHz band radio must
be disabled as described in page 23.
3. The Access Point supports Dynamic Frequency Selection (DFS) and Transmit Power Control
(TPC) as required for use in Europe.
5GHz Channel Assignments In Europe
Countries of Operation
Permitted 5GHz Band Channels
Austria, France and Switzerland
Channels 36, 40, 44, 48, 52, 56, 60, 64
Denmark, Italy, Germany, Finland, Iceland,
Holland, Norway, Sweden, Portugal, UK, Ireland
Channels 36, 40, 44, 48, 52, 56, 60, 64
and 100 to 140
Liechtenstein
Channels 36, 40, 44, 48
2.4GHz Channel Assignments In Europe
Countries of Operation
Permitted 2.4GHz Band Channels
All European Community excluding France
Channels 1 to 13
France
Channels 10, 11, 12, 13
Other 5GHz Channel Assignments
Countries of Operation
Permitted 5GHz Band Channels
USA and Canada
Channels 36 to 64 and 149 to 161 (pt-pt)
Other 2.4GHz Channel Assignments
Countries of Operation
Permitted 2.4GHz Band Channels
USA and Canada
Channels 1 to 11
Note that the above channel assignment information is subject to change; check with local authorities for details.
PL0356 ©2003TycoElectronics Issue 1