Tyco Card Reader S610s - Manual

www.cemsys.com
OVERVIEW
The S610s Card Reader is designed for use as part of an integrated on-line access
control system and is used to control access to restricted areas or in special
applications where card activation of machinery is required.
Using a powerful 32bit processor, the S610s gives full off-line validation and decision
making at the point of entry, even when host communication is not available.
Designed for use with all card technologies the S610s device is available with integral
reading support for 125 KHz HID Proximity, 13.56 MHz MiFare and PicoPass smartcard
as well as a multi-technology option to support Proximity + MiFare. Two additional
wiegand inputs are also available for connecting other reading technologies externally
or an Exit read head for IN/OUT control.
The IP 65 rated polycarbonate enclosure houses the reader electronics, a large 4x3
Keypad, graphical display screen and three LED indicators.
The reader has 4 analogue inputs, which can be used to monitor door and alarm
conditions for transmission to the host computer. Two outputs are also available to
control the activation of locks or other equipment.
S610s Reader
• Industry’s most advanced card
reader
• Integral reading technology for
Proximity, MiFare, Proximity +
MiFare or Inside PicoPass.
• Structured database allows storage
of large amounts of cardholder
records for off-line card validation
• Backlit Monochrome Graphics
LCD display with heating element
provides localised character sets
and instantly recognisable icons
under the most extreme conditions
• Universal Reader - supports all card
technologies
• Keypad for configuration and
optional personnel Identification
Number (PIN)
• 4 analogue inputs to monitor alarm
conditions and 2 changeover relay
outputs to activate door strike or
other equipment
• Remote programming facility to
download program
• Broadcast Facility to enable
selective operational mode
FEATURES
S610s Reader
Multi-technology Intelligent Serial Reader