Tyco Ethernet Input Output Controller EIOC - Manual

www.cemsys.com
OVERVIEW
The Ethernet Input Output Controller (EIOC) is an addition to the Ethernet suite of
devices for use on the AC2000 system. Connecting to the nearest network point the
EIOC provides a flexible means to monitor and control an array of equipment.
The EIOC features 16 analogue inputs and 8 digital outputs. The 16 analogue inputs
can be cross-mapped to one or many of the outputs upon activation / deactivation.
The 8 digital outputs are a combination of 4 NO/NC relay contacts and 4 open collector
switches that can all be controlled by the EIOC. The outputs can be used to control
solid-state relays, which in turn can control all kinds of equipment including Intruder
panels, PIR detectors, or switching on/off heating and lighting.
Additionally inputs on the EIOC can be used to activate a Broadcast Zone on the
AC2000 system which can be configured to activate an output on a different EIOC or
CEM reader located anywhere on the network.
EIOC
• Ethernet connectivity to host
• 16 Inputs (2 or 4 state)
• 8 Outputs (4 Relay NO/NC and
4 Open Collector)
• Outputs can be mapped to
single or multiple inputs on
the same controller or across
the network
• Dedicated tamper input
• Designed for ease of
installation and maintenance
using 2 part connectors
throughout
• Backup battery connection for
emergency power (optional)
FEATURES
EIOC
Ethernet Input Output Controller