Tyco InfoProx Lite IPL200 - Manual

www.cemsys.com
OVERVIEW
The InfoProx™ Lite is a lower cost proximity card reader that is designed to operate as
a card reading device on a CEM access control system where offline card validation is
not required.
Available in both traditional 125 kHz proximity (IPL200) amd MiFare smart card
(IPL210) options, the reader, LCD display, LEDs and keypad are housed in a single
polycarbonate enclosure. Despite its small size, the reader has a 32 character backlit
LCD to display messages, providing system administrators and users with immediate
plain text descriptions of events such as ‘Access Denied’. The reader provides its own
anti-tamper protection and interfaces directly to the door furniture and 12V lock power
supply eliminating the need for additional controllers, I/O (Input/Output) units and
greatly reducing installation costs.
The InfoProx card reader has four analogue inputs and one output allowing it to control
local door strikes or other equipment without the need for a separate door controller.
The keypad also offers additional security when PIN validation is required. An InfoProx
Exit reader is also supported for IN/OUT control.
InfoProx™ Lite
IPL200/IPL210
• Available in both 125 kHz
proximity (IPL200) and MiFare
smart card (IPL210) technology
options
• Three LED indicators to visually
confirm or deny entry
• Suitable for indoor or outdoor
installation
• Backlit LCD display shows easy to
understand messages for the user
• Keypad for added PIN security
• Supports Entry/Exit configuration
for IN/OUT control
• Interfaces directly with door
furniture and lock power supply –
no need for additional controllers
or I/O units
• 4 inputs to monitor alarms such
as door held/forced conditions
and secure side exit push button
operation
FEATURES
InfoProx™ Lite
IPL200/IPL210
Proximity/Smartcard Reader