Tyan Computer Transport GX21 B2735 - Manual (Page 59)

3.6 Replacing the storage backplane
Chapter 3: Replacing pre-installed components 51
1. Remove the chassis cover as described in section 2.2.1
Removing the chassis cover.
2. Remove the two screws that secure the metal retaining
plate to the chassis and lift it free as shown.
3. Remove all cables connected to the S-ATA backplane,
including front panel cable, power cables, and S-ATA
data cables.
4. Remove the six screws that secure the S-ATA backplane
bracket to the chassis.
5. Remove the S-ATA backplane bracket and backplanes
free from the chassis.