Toshiba TDP-MT200 - Manual (Page 40)

40
Specifications (Continued)
■ List of supported signals (DVI signals)
This projector supports the following DVI signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
Resolution
640 x 480
800 x 600
832 x 624
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
Mode
VGA_60
VGA_72
SVGA_60
SVGA_72
MAC16"
XGA_60
XGA_70
XGA_75
SXGA1_75
QuadVGA_60
SXGA3_60
Refresh rate
(Hz)
59.940
72.809
60.317
72.188
74.550
60.004
70.069
75.029
75.000
60.000
60.020
H-frequency
(kHz)
31.469
37.861
37.879
48.077
49.725
48.363
56.476
60.023
67.500
60.000
63.981
Clock
(MHz)
25.175
31.500
40.000
50.000
57.283
65.000
75.000
78.750
108.000
108.000
108.000
Signal format fh(kHz) fv(Hz)
480p(525p)@60Hz 31.47 59.94
576p(625p)@50Hz 31.25 50.00
720p(750p)@60Hz 45.00 60.00
720p(750p)@50Hz 37.50 50.00
1080i(1125i)@60Hz 33.75 60.00
1080i(1125i)@50Hz 28.13 50.00
Note
• Signals which resolution exceeds the native resolution (854 × 480 pixels) will be
compressed. For this reason, some information may be lost, or image quality may be
affected.